• Increase font size
  • Default font size
  • Decrease font size

Series F1 Electromagnetic Separators with Wet-Type Grids for Dry Materials

SGFF1WetGridsFor moderately free-flowing materials, our Wet-Type F1 Electromagnetic Separators utilize the same proprietary grids normally used for dry granular materials and powders. Matrices comprised of wet-type grids have many times the cumulative length of collecting edges than those found in vane-type grids, allowing for better separation. With a unique assembly of grids and a different vibration pattern, such materials can be more effectively processed. A single pass through a matrix of wet grids is equivalent to several passes through a matrix of vane-type grids. 

How the F1 Electromagnetic Separator with Wet-Type Grids Works

  1. Material is fed into a hopper (Floor Model) or feed sock (Suspended Model).
  2. Material is processed through a stack of alternately inclined parallel vanespouring over each vane edge onto the face of the vane below.
  3. Collecting edges attract and hold the ferromagnetic particles.
  4. Material is discharged through the bottom hub (on both units).

F1 Electromagnetic Separator with Wet-Type Grids Specifications

68WVFHPD          68WVFDM


If you are in need of an Electromagnetic Separator and would like to learn more about one of our Series F1 Separators, contact S.G. Frantz today.